KwikDraw 497664, Methyl Butane, Hexane-20, 50 - 3000 ppm, Colorimetric Stain Tubes, By Uniphos

KwikDraw 497664, Methyl Butane, Hexane-20, 50 - 3000 ppm, Colorimetric Stain Tubes, By Uniphos Envirotronic

7-MM DIAMETER TUBES FOR USE WITH BELLOWS HAND PUMP

Uniphos acquired KwikDraw in 2014 and recognizing the value of these tubes, kept the product line intact. The KwikDraw tube system is based on a bellows style pump that delivers an accurate 100 cc per pump stroke every time. The KwikDraw, bellows style pump and tube combination operate at a much quicker sampling rate with a typical pump stroke cycle in the range of 10 to 30 seconds, and most measurements based on higher sample volume per test.

GAS DETECTOR TUBES provide a simple measurement of chemicals in gas samples. The tubes are pre-calibrated, take only a few minutes to complete sampling, and the concentration is read directly from the length of color stain. Tubes are available for over 150 different chemicals and concentration ranges.

Tube Type: KwikDraw Tubes

KwikDraw Gas Detector Tube Measurement System

Short-Term KwikDraw Tubes - KwikDraw detector tubes provide a reliable method for the detection of more than 200 gases and vapors. Used with a manually operated hand pump or the automatic Toximeter III, these tubes can be used to provide spot measurements with most results in less than 5 minutes, read directly from the calibration curve printed on the tube.

Alternate: KwikDraw-Uniphos-D5086832-11

Applicable Tube: Hexane-20

Count Per Box: 10

Gas Measured: Methyl Butane

Global Part Number: D5086832

HAZMAT Item: No

Measuring Range: 50 - 3000 ppm

New: NEW

Shelf Life Months: 24

Type: KwikDraw 497664, Methyl Butane, Hexane-20, 50 - 3000 ppm, Colorimetric Stain Tubes, By Uniphos

US Part Number: 497664