MSA 477149, KIT, GAS CALIBRATION, RP0 .25 LPM REGULATOR, 30' TUBING, CAPS

MSA 477149, KIT, GAS CALIBRATION, RP0 .25 LPM REGULATOR, 30' TUBING, CAPS

MSA Calibration Check Kit consist of a regulating valve which includes a gauge to measure container pressure, an adapter hose, sensor adapter (where applicable), instructions, and a case fitted with room for two Model RP cylinders of calibration check gas. 477149 Check Kit, Model RP, with 0.25 lpm regulator-complete. Order gas separate.

The cylinders of calibration check gas for use with Model RP kits are lightweight steel containers approximately 14-1/4 inches high and 3-1/2 inches in diameter and, depending upon the individual pressure requirements, contain 58 or 100 liters of a specified gas mixture of a known (+/- 5% tolerance) concentration.

MSA certifies that the gas mixture in the calibration gas cylinders was prepared gravimetrically, using NIST traceable weights. The lot number and nominal value of the gas constituents in percent by volume, percent by mass, ppm mass or volume are specified on the cylinder. Each MSA calibration gas cylinder is shipped with an individual copy of a certificate of analysis.

Country of Origin: USA

GTIN: 4032792173484

HAZMAT Item: NO

New: Yes

Type: 477149, KIT, GAS CAL, RP0.25LPM REG, 30FT TBNG, CAP

Unit of Measure: EA

UPC Code: 4032792173484