GfG 2200-007, GMA200-MT16, Fixed Controllers, Controllers, GMA 200-MT16/7 GMA 200 Controller, configured for 7 measuring points, data logging

GMA200-MT16, Fixed Controllers, Controllers, GMA 200-MT16/7 GMA 200 Controller, configured for 7 measuring points, data logging, GfG 2200-007

GMA200-MT16 A powerful controller for sophisticated gas detection systems, by GfG Instrumentation

GMA200-MT16 Monitoring 16 digital or analog transmitters.

Wherever gases are used or may be present in industrial and commercial applications, they must be monitored. A gas detection system consists of transmitters, which use sensors to detect gases, and a controller used for a wide range of tasks. The GMA200-MT16 controller is ideally suited for use in complex gas detection systems with up to 16 digital or analog transmitters. Safety measures can be connected directly to the GMA200-MT16 via internal relays. The current measured values, alarms and special states of the transmitters can be viewed directly on the controller's display.

Fixed transmitters monitor combustible or toxic gases and vapors present in the ambient air as well as the oxygen concentration. A controller displays the measured gas concentrations centrally and processes the incoming signals. The GMA200-MT16 is the right choice if:

• gases are monitored with up to 16 digital or analog transmitters.
• safety measures are to be operated via the controller.
• the measured values are to be shown centrally on a display.
• an acoustic and visual alarm is required on site.
• operating status and alarms are to be indicated by status LEDs.

Wide range of applications

The GMA200-MT16 controller and the connected transmitters form a stationary gas detection system for measuring toxic and combustible gases as well as oxygen concentration. Up to 16 digital transmitters can communicate with the controller via the RS-485 interface. Analog transmitters (up to 16) can be connected via 0.2-1 mA or 4-20 mA. The GMA200-MT16 is suitable for any GfG transmitter and any available gas type. This offers a large number of possible combinations of gases, measuring ranges, measuring points and Ex-zones to be monitored simultaneously. The controller is designed for mounting on a DIN rail (TS35), for example in a control cabinet. The supply voltage is 24 V DC.

Internal relays and extensions

For the implementation of safety measures, 6 internal relays with one normally open contact each can be programmed individually. Two additional relays are available for fault messages and maintenance. If required by the application, the number of programmable relays can be increased up to 70 (6 internal and 64 external relays). The relay modules are connected via the GMA bus interface. GfG's GMA200-RT and GMA200-RTD relay modules allow safety measures to be implemented in a decentralized manner, reducing the amount of cabling required.

Clear indicators for assessing the hazard situation

The GMA200-MT16 has a color-backlit 2.2-inch display. It shows the current measured values of the connected transmitters at any time. In the event of an alarm, the background color changes from green to red. At the same time, LEDs indicate the alarm level and the switching states of the relays. A local alarm is triggered by a loud, integrated buzzer (70 dB(A)). Two inputs are available for external alarm acknowledgement push buttons.

Operation, visualization and data storage

The operation of the controller and the alarm acknowledgement on site are done intuitively via 5 push buttons. Configuration is possible via the mini-USB interface using a PC and the GMAConfig software. With the optional GMA200-VS software, all measured values and statuses of the connected transmitters can also be displayed decentrally on a PC or monitor. Equipped with a microSD card, the controller permanently stores measured values, average values, alarm events and faults at individually configurable intervals for evaluation.

Key features and General information at a glance:

• suitable for every GfG transmitter.
• monitors 1 to 16 measuring points.

Features:

• 8 integrated relays for safety concepts, fault messages and maintenance (6 of which can be programmed freely).
• 0.2-1 mA, 4-20 mA or RS-485 (Modbus).
• color backlit 2.2" display.
• 15 colored status LEDs.
• audible alarm.
• housing for rail mounting (TS35).

Optional:

• data logger (microSD card).
• relay module for expansion (up to 4 modules with 16 relays each).
• visualization software.
• Uninterruptible power supply.

Approvals / Certifications:

• ATEX certification: II (2) G.
• SIL 2/3

HAZMAT Item: No

New: Yes

Type: 2200-007, GMA200-MT16, Fixed Controllers