GfG 2210-004, 25 Series, Fixed Controllers, Control Panels, 25 Series control panel with four input channels, horn and strobe

25 Series, Fixed Controllers, Control Panels, 25 Series control panel with four input channels, horn and strobe, GfG 2210-004

25 Series Control Panel: Controller, local display, horn and strobe.

Simple and effective

The 25 series control panel is available in a single channel (2210- 001 and 2210-00110) or a one to four channel (2210-004 and 2210- 00410) version. The panel comes complete with controller, local display, horn and strobe. The single channel version also features a 4-20 mA output.

Alarm relays

The controller provides four voltage-free relays for the three alarms and one fault warning. The relays may be used to control additional alarm devices like lights or horns.

Alarm points

Each alarm can be adjusted separately. The alarm values can be freely adjusted within the detection range. Every alarm point value can be factory programmed to be latching/non-latching and resettable/ non-resettable.

Transmitters / sensors

The 25 series control panel may be connected to any available GfG transmitter for detection of oxygen (O2 ), combustible gases (LEL) or any transmitter from a wide range of toxic gases.

Technical Data: 25 Series.

Control Panels:
• Any available GfG gas transmitter.
• 2210-001: 1 transmitter.
• 2210-004: 1 to 4 transmitters.
• *2210-00110: 1 channel w/2 amp power supply.
• *2210-00410: 1 to 4 channel w/2 amp power supply.
• 2000230 - push button reset (optional).
Display:
• 3-digit LED display.
• 1 LED green - operational status.
• 1 LED yellow - fault.
• 3 LED red - alarm.
• Display of maximum / minimum values.
Power Supply: 24 V DC, 1 Amp wall pack, CUL/USA, *2 Amp integration.
Alarms:
• 3 alarm points.
• user adjustable within the detection range.
Alarm Functions Available:
• Exceeding /descending.
• Latching / non-latching.
• Resettable / non-resettable.
• Hysteresis adjustable • Delay-time 0 to 2 minutes.
Relays:
• 3 alarm points, 1 fault - voltage free.
• Factory setting.
• A1 - strobe.
• A2 - open.
• A3 - horn.
• Fault - open.
• Voltage: 250 V AC 50/60 Hz or 250 DC max.
Output Signal: Linear 4-20 mA (2210-001 and 2210-00110).
Horn: bright red, flashing.
Strobe:.
• Low - 70 dB at 10 ft / 1 m.
• High - 83 dB at 10 ft / 1 m.
Environmental conditions:
Humidity: 0 to 99% r.h. non-condensing.
Pressure: 700 to 1,300 hPA.
Housing Weight: 6.25 lbs / 2.95 kg.
Housing Dimensions: 11 x 7 x 2.75 in / 17.9 x 17.8 x 7 cm (H x W x D).

HAZMAT Item: No

New: Yes

Type: 2210-004, 25 Series, Fixed Controllers