GfG 2801-30-001, CC28, Fixed Transmitter, Transmitter with sensor - gas optimized catalytic sensor 0-100% LEL (MK 208-1), Ethanol C2H6O - No Display

CC28, Fixed Transmitter, Transmitter with sensor - gas optimized catalytic sensor 0-100% LEL (MK 208-1), Ethanol C2H6O - No Display, GfG 2801-30-001

CC28 Fixed Transmitter, Detecting combustible gases in Ex zone 1, by GfG Instrumentation

CC28 Transmitter - For flammable gases and vapors in Ex zones.

Various models for different applications. Choose from the: CC28 without Display & Alarm/ CC28 D with Display & without Alarm/ CC28 DA with Display and Alarm.

If combustible gases and vapors are to be monitored in Ex zones, the CC28 transmitter is a reliable and economical solution. The CC28 uses an analog (4-20 mA) signal to provide measured values and status information. The special stack effect ensures very short response times of only a few seconds for fast warning of explosion hazards. In combination with GfG's reliable controllers, it can be installed in new gas detection systems or retrofitted into existing ones.

The CC28 uses catalytic combustion (CC) to detect combustible gases and vapours such as methane, propane and hydrogen. The long-life sensors make the CC28 an economical solution for detecting a wide range of combustible gases in the measurement ranges of 0 to 100% LEL and 0 to 4% by volume (NH3). Its automatic temperature compensation and the linearization of the measurement signals ensure high measurement accuracy.

Explosion protection, functional safety and device protection

The CC28 has ATEX certification for use in Ex Zone 1, and its hardware complies with the European Functional Safety Standard DIN EN 61508-2: 2011 (SIL). The housing is protected against ingress of dust and water (protection class: IP64). An optional weatherproof housing provides additional protection.

Communication and service

Signals are transmitted via the analog industry standard (4-20 mA). The CC28 uses two status LEDs to indicate its operating status. Service and adjustments are carried out on site using the optional RC2 remote control (one-man adjustment). The pre-adjusted sensors can be easily replaced thanks to Smart Sensor technology. Test gases for function tests can be inserted using a flow adapter.

Key features and General information at a glance:

• Measuring principle: catalytic combustion (CC).
• For flammable gases and vapors.
• Short response time due to stack effect.
• Expected sensor lifetime: 5 years.
• Signal transmission: 4-20 mA.
• Protection class: IP64.

Approvals / Certifications:

• ATEX certification: II 2G Ex demb [ib] IIC T4 Gb.

• SIL 2/3 (hardware).

Optionally available:

• operating unit RC2, windshield, weatherproof housing, flow-through adapter.

Detectable Gases

LEL combustible gases, C₂H₂ Acetylene, C₂H₄ Ethylene, C₂H₆O Ethanol, C₂H₆ Ethane, C₂H₆O Dimethyl ether, C₃H₄ Propine, C₃H₆ Propene, C₃H₆O Acetone, C₃H₆O₂₂ Methyl acetate, C₃H₈ Propane, C₃H₈O n-Propanol, C₄H₈O 2-Butanon (MEK), C₄H₈O₂ Ethyl acetate, C₄H₁₀ n-Butane, C₄H₁₀O n-Butanol, C₅H₁₂ Pentane (n), C₆H₆ Benzene, C₆H₁₂ Cyclohexane, C₆H₁₂O Methyl isobutyl ketone (MIBK), C₆H₁₄ n-Hexane, C₇H₈ Toluene, C₇H₁₆ n-Heptane, C₈H₁₈ Octane (n), C₉H₂₀ n-Nonane, CH₄ Methane, CH₄O Methanol, CO Carbon monoxide, H₂ Hydrogen, NH₃ Ammonia.

HAZMAT Item: No

New: Yes

Type: 2801-30-001, CC28, Fixed Transmitter