GfG 2901-99-009, IR29 e (Increased Safety), Fixed Transmitter, Instrument - IR 29 DB Transmitter, with display, Modbus, with pressure & humidity compensation, IP67 , Ethanol (C2H6O) , 0 - 100% LEL

IR29 e (Increased Safety), Fixed Transmitter, Instrument - IR 29 DB Transmitter, with display, Modbus, with pressure & humidity compensation, IP67 , Ethanol (C2H6O) , 0 - 100% LEL, GfG 2901-99-009

IR29 DB Series Fixed Transmitters With Display & Modbus for LEL in Ex zone 1, by GfG Instrumentation

IR29 DB Transmitters - With Display, Modbus, and, infrared sensor for flammable gases in Ex zones. If flammable gases and vapors need to be monitored in Ex zones, the IR29 DB transmitter is a reliable and robust solution. It transmits measured values and status notifications via Modbus protocol on an RS-485 interface. The LC display indicates the current measured values. Gases are monitored either on site by diffusion or by pressureless gas supply using a flow adapter. In combination with one of GfG's reliable controllers, it can be installed in new gas detection systems or retrofitted into existing ones.

The IR29 DB uses non-dispersive infrared (NDIR) sensor technology to detect combustible gases and vapors. Our patented 4-beam and 4-wavelength technology with gold-plated mirror optics, which do not require any beam splitters, is used to ensure selective measurement results without false alarms.The installed infrared sensors detect up to three gases simultaneously and also enable measurements above the lower explosion limit (LEL). They do not require oxygen and are not susceptible to sensor poisons. The long-life sensors make the IR29 DB a permanently reliable solution for detecting a wide range of combustible gases and vapors in the 0 to 100 % LEL measuring range. Its automatic temperature compensation and the linearization of the measurement signals ensure high measurement accuracy.

Communication and service

The IR29 DB transmits signals via the digital RS-485 interface (Modbus). Two status LEDs are used to indicate its operation status. The LC display indicates the current measured gas concentration. Depending on the location of the installation, you might also be interested in the rotating version. Service and adjustments can be carried out on site using the optional RC2 remote control or the RC3 IR remote control (one-man adjustment). The IR29 DB's self-monitoring functions increases device safety between maintenance intervals. The transmitter automatically records measured values and incidents in an internal ring buffer. Test gases for function tests and adjustments can be inserted via a calibration adapter.

Safety and instrument protection

The IR29 DB is ATEX certified for use in Ex zone 1. It complies with the increased safety "e" and encapsulation "m" standards. The housing made of V4A stainless steel and poly-carbonate is protected against the ingress of dust and water (protection class: IP67). Accessories include a guard plate and dust filter.

Key features and General Information at a glance:

• Measuring principle: Infrared (IR).
• Measuring principle: infrared (IR).
• For combustible gases and vapors.
• Not susceptible to sensor poisons.
• Expected sensor lifetime: 6 years.
• Color display (optional: rotating display).
• Signal transmission: 4-20 mA.
• Protection class: IP67.
• Integrated data logger.

Approvals / Certifications:

ATEX certification: II 2G Ex eb mb ib [ib] IIC T4 Gb.

Optionally available:

Pressure and humidity sensors, ex-proof control unit RC2, impact protection, flow adapter, calibration adapter, protection plate, dust filter, weatherproof housing, flow adapter.

Detectable gases:

LEL combustible gases.

• C₂H₂ Acetylene.
• C₂H₄ Ethylene.
• C₂H₆O Ethanol.
• C₃H₈ Propane.
• C₃H₈O n-Propanol.
• C₄H₁₀ n-Butane.
• CH₄ Methane.
• Other gases on request.

HAZMAT Item: No

New: Yes

Type: 2901-99-009, IR29 e (Increased Safety) Fixed Transmitter, 0 - 100% LEL